Source Address
From BACnet Wiki
Revision as of 02:22, 24 December 2009 by Glenn (Talk | contribs) (catcorr Category:2 OSI link layer)
The same formats are used for Source and Destination addresses. Substitute "Destination" for "Source" below if desired.
Notes
- Part of the NPDU (Network Layer Protocol Data Unit)
- SADR - Ultimate Source MAC Layer Address, as opposed to SA - Local Source Address
- If the SADR exists, then the message has arrived from a router (Section 6.5.4, page 57)
- A device need not know it's own Network Number. (Section 6.5.4, page 57)
Octets | Name | Meaning | |||||||
1 | SLEN | Source MAC Layer Address Length | |||||||
Variable | SADR | Source MAC Layer Address |
Physical Layer | SLEN | |||||||
MSTP | 1 (Usually switch on device) | |||||||
BACnet/IP | 6 (IP Address and Port) |
APDU BBMD BVLC BVLL DADR DNET Encoding I-Am LSAP MAC NPCI NPDU NSAP NSDU SA SADR SNET |
Edit this box. |