Difference between revisions of "Network Layer Message Type"
From BACnet Wiki
| Line 1: | Line 1: | ||
| − | AKA Network Layer Protocol Messages | + | AKA Network Layer Protocol Messages or RPDU (Routing PDU) |
This PDU is the Network Layer equivalent of the Application Layer [[APDU]]. The Network Layer message and the [[NPCI]] make up the [[NPDU]]. The NPCI and NPDU are forever getting confused, so we try and be very careful with our terminology. In the search for the equivalent of APDU for the "Network Layer PDU" we reject [[NPDU]] as already used. NLPDU does not make us happy, nor is NAPDU appropriate (confusing vs APDU). So in our terminology we use [[RPDU]] (Routing PDU, since this is what this PDU is all about anyway... | This PDU is the Network Layer equivalent of the Application Layer [[APDU]]. The Network Layer message and the [[NPCI]] make up the [[NPDU]]. The NPCI and NPDU are forever getting confused, so we try and be very careful with our terminology. In the search for the equivalent of APDU for the "Network Layer PDU" we reject [[NPDU]] as already used. NLPDU does not make us happy, nor is NAPDU appropriate (confusing vs APDU). So in our terminology we use [[RPDU]] (Routing PDU, since this is what this PDU is all about anyway... | ||
| + | |||
{| border="1" cellpadding="10" cellspacing="0" | {| border="1" cellpadding="10" cellspacing="0" | ||
Revision as of 19:20, 20 August 2018
AKA Network Layer Protocol Messages or RPDU (Routing PDU)
This PDU is the Network Layer equivalent of the Application Layer APDU. The Network Layer message and the NPCI make up the NPDU. The NPCI and NPDU are forever getting confused, so we try and be very careful with our terminology. In the search for the equivalent of APDU for the "Network Layer PDU" we reject NPDU as already used. NLPDU does not make us happy, nor is NAPDU appropriate (confusing vs APDU). So in our terminology we use RPDU (Routing PDU, since this is what this PDU is all about anyway...
| 0x00 | Who-Is-Router-To-Network |
| 0x01 | I-Am-Router-To-Network |
| 0x02 | I-Could-Be-Router-To-Network |
| 0x03 | Reject-Message-To-Network |
| 0x04 | Router-Busy-To-Network |
| 0x05 | Router-Available-To-Network |
| 0x06 | Initialize-Routing-Table |
| 0x07 | Initialize-Routing-Table-ACK |
| 0x08 | Establish-Connection-To-Network |
| 0x09 | Disconnect-Connection-To-Network |
| 0x0A | Challenge-Request (For BACnet Network Security) |
| 0x0B | Security-Payload (For BACnet Network Security) |
| 0x0C | Security-Response (For BACnet Network Security) |
| 0x0D | Request-Key-Update (For BACnet Network Security) |
| 0x0E | Update-Key-Set (For BACnet Network Security) |
| 0x0F | Update-Distribution-Key (For BACnet Network Security) |
| 0x10 | Request-Master-Key (For BACnet Network Security) |
| 0x11 | Set-Master-Key (For BACnet Network Security) |
| 0x12 to 0x7F | Reserved for use by ASHRAE |
| 0x80 to 0xFF | Available for Vendor Proprietary Messages |
Section 6.2.4 Page 52
| APDU BBMD BVLC BVLL DADR DNET Encoding I-Am LSAP MAC NPCI NPDU NSAP NSDU SA SADR SNET |
| Edit this box. |
