MS/TP Best Practices

From BACnet Wiki
Revision as of 00:17, 15 May 2016 by Edward (Talk | contribs) (Created page with "Checklist Are there 3 wires or two? *If there are 3 wires, is the common grounded at only one point? *If there are 2 wires, is each node grounded properly? *Is the link proper...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Checklist Are there 3 wires or two?

  • If there are 3 wires, is the common grounded at only one point?
  • If there are 2 wires, is each node grounded properly?
  • Is the link properly terminated on both ends with a 120 Ohm resistor?