Difference between revisions of "MS/TP Best Practices"

From BACnet Wiki
Jump to: navigation, search
(Created page with "Checklist Are there 3 wires or two? *If there are 3 wires, is the common grounded at only one point? *If there are 2 wires, is each node grounded properly? *Is the link proper...")
 
 
Line 1: Line 1:
 
Checklist
 
Checklist
Are there 3 wires or two?
+
 
 
*If there are 3 wires, is the common grounded at only one point?
 
*If there are 3 wires, is the common grounded at only one point?
 
*If there are 2 wires, is each node grounded properly?
 
*If there are 2 wires, is each node grounded properly?
 
*Is the link properly terminated on both ends with a 120 Ohm resistor?
 
*Is the link properly terminated on both ends with a 120 Ohm resistor?

Latest revision as of 00:17, 15 May 2016

Checklist

  • If there are 3 wires, is the common grounded at only one point?
  • If there are 2 wires, is each node grounded properly?
  • Is the link properly terminated on both ends with a 120 Ohm resistor?